User manual
VDC-295IDH
_________________________________________________________________________________
- 43 -
Initialize data
Factory default
Select the factory default settings to initialize the data.
Erase programmed data:
Erase all stored data from the Flash-ROM of the selected camera. You will be asked
to enter “ON” or “OFF”. If you wish to erase all data, then select „Erase run“,
otherwise pres the ESC button to exit without erasing. The erased data includes all
stored data
(auto scans, presets, tours,…) except the “Origin Offset”. The “Origin
Offset” value remains valid even after all data is erased. The offset value can be set
to “0” as default.
