User manual
VDC-295IDH
_________________________________________________________________________________
- 20 -
3.4 Auto-Scan (shortcut: SCAN)
The auto scan supports up to 17 programmed angles at user-programmable speeds.
Follow the below steps to program the auto scan function.
Number:
01-08, 10-17, 09 = auto-pan mode
Title:
Up to 12 characters
Mode:
Normal, vector, random (auto-pan mode: normal, random only):
Normal:
Move the camera from start point to end point in panning mode.
Vector:
Move the camera from start point to end point including tilt and
zoom simultaneously and linearly. For some camera models,
the zoom is fixed at a wider angle and the zoom magnification
information is not displayed.
Random:
Move the camera randomly between start point and end point.
Speed:
1-13. The lower the value, the slower the speed.
Scan Dir:
Set the scan direction:
CCW: Counter clockwise
CW:
Clockwise
Swap:
Swap the start point for the end point.
Dwell:
Set the dwell time at both ends from 01-99 sec.
