User manual
VDC-295IDH
_________________________________________________________________________________
- 42 -
Panning range
If the camera is installed near a wall, the panning range can be limited by the user.
1. Place the dome camera at under 90° vertically.
2. Push the joystick to the right to set the right limit.
3. Push the joystick to the left to set the left limit.
4. Set
„Enable“ to „On“.
To swap the right and the left limit, set
„Swap“ to „On“.
To apply limits tot he auto-
pan (endless panning), set „Auto pan“ to „On“.
Note:
When you use the panning range, it is recommended to use „Auto“ in „Flip“ mode. If
the flip mode is set to 90°, 100°, 110° or 120° and the camera is moved vertically by
90°, the panning range operates in opposite direction.
