User manual
VDC-295IDH
_________________________________________________________________________________
- 32 -
3.10 Area title
Enter a specific name for the programmed angle between START and END. In the screen
below, the camera points at an angle between 124.3° (pan), 30.7° (tilt) to 359.5° (pan/tilt) and
45.4° (tilt). “ABC” will be displayed on the screen.
Number:
01-16
Title:
Up to 12 characters
Swap:
Swap the start point for the end point.
1. Select
„Number“ by moving the joystick left or right.
2. To edit
the title, follow the procedure as descrived for the „auto scan“.
3. Select
„Start angle“. Press and hold CTRL while selecting the start position with the
joystick. The current panning position will be displayed. Release the CTRL button to
complete the selection of the start position. Alternatively, you can press IRIS OPEN to
display CTRL. Move to the desired position. Press IRIS CLOSE and CTRL will
disappear. To adjust at 0.1° intervals, twist the joystick at the pan and tilt field.
4. Select
„End angle“. Press and hold CTRL while selecting the end position with the
joystick. The current panning position will be displayed. Release the CTRL button to
complete the selection of the end position. Alternatively, you can press IRIS OPEN to
display CTRL. Move to the desired position. Press IRIS CLOSE and CTRL will
disappear. To adjust at 0.1° intervals, twist the joystick at the pan and tilt field
5. Select
„Swap“. If set to „ON“, start and end angle will be swapped.
6. Select
„Save“ „Exit“ by pushing the joystick to the right. Alternatively, press IRIS
OPEN. Press ESC or IRIS CLOSE to exit the program without saving.
