User manual
VDC-295IDH
_________________________________________________________________________________
- 28 -
8.
To edit the title, follow the same steps as described in the chapter „auto scan“.
9. Select
„Save“ and „Exit“ by pushing the joystick to the left. Press ESC to exit the
program without saving.
You can expand the tour sequence by calling up other programmed tours.
Notes:
The speed only applies in vector mode.
In tour mode, in conjunction with preset and auto scan, you can make the camera travel from
a preset position to another preset position at a specific speed.
Example:
Preset 001>002>003>004>005>006, auto scan 01 starts at preset 002 and ends at preset
003, auto scan 02 starts at preset 005 and ends at preset 006, tour 001, 002, A01, 004, A02.
1
2 2~3
4
5~6, repeat
The arrow
indicates a quick move; the tilde ~ indicates the programmed speed.
To change the dwell time of the preset in the tour:
Use the joystick to move the cursor to a stored preset position. By pressing PRST key, the
camera will move to the stored preset view and the cursor moves to the dwell time field. After
changing the dwell time, press PRST key and the cursor moves to the preset number.
To assign the functions other than preset in the tour when the function key is not available:
Use the joystick to move the cursor to a stored preset position. Pressing the CTRL key or the
IRIS OPEN key will change the preset number to other function (auto scan, pattern, tour,
preset) with the first programmed number. To change the number, twist the joystick or press
TELE or WIDE.
