User manual
VDC-295IDH
_________________________________________________________________________________
- 29 -
3.8 Pattern (shortcut: PTRN)
The pattern feature records control steps of the selected dome camera. Up to 8 patterns can
be stored and played back by pressing the No. + PTRN keys subsequently.
How to program a pattern:
1. Press MENU to call up the main menu on the monitor. Scroll to "Pattern" and move
the joystick to the right. Alternatively, use the PTRN button on the keyboard.
2. Select the desired pattern to be programmed by pushing the joystick up or down. If
the pattern is not 000, a pattern has already been recorded. Patterns can be
overwritten.
3. Press and hold down the CTRL key while controlling the camera direction and zoom
with the joystick. The commands will automatically be recorded until you release the
CTRL button. Alternatively, you can press IRIS OPEN to display CTRL. Move the
position and the zoom position. Press IRIS CLOSE to make CTRL disappear.
4.
Scroll down to „Save and Exit“ and push the joystick to the right to save the settings
and to exit the menu. Press ESC to exit the program without saving.
5. To e
dit the title, follow the same procedure as discribe in the chapter „auto scan“.
Notes:
Press the HOME key at any programmed position to delete the pattern.
If the total recording time reaches 500 seconds, it will automatically stop.
