manualshive.com logo in svg

Samsung SVMi-20i, Руководство пользователя

Samsung SVMi-20i - компактная и удобная система сотрудничества, идеально подходящая для офисов любого размера. Инструкция пользователя доступна для скачивания бесплатно с нашего веб-сайта. Получите полное руководство по использованию этого продукта прямо сейчас на manualshive.com.

Поделиться
Скачать
background image

 

SVMi-20i User Guide 

© SAMSUNG Electronics Co., Ltd.

 

239

 

(Exception: if the Program itself is interactive but does not normally print such an announcement, your 
work based on the Program is not required to print an announcement.) 

These requirements apply to the modified work as a whole.   
If identifiable sections of that work are not derived from the Program, and can be reasonably considered 
independent and separate works in themselves, then this License, and its terms, do not apply to those 
sections when you distribute them as separate works. But when you distribute the same sections as part of 
a whole which is a work based on the Program, the distribution of the whole must be on the terms of this 
License, whose permissions for other licensees extend to the entire whole, and thus to each and every part 
regardless of who wrote it. 
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; 
rather, the intent is to exercise the right to control the distribution of derivative or collective works based on 
the Program. In addition, mere aggregation of another work not based on the Program with the Program (or 
with a work based on the Program) on a volume of a storage or distribution medium does not bring the other 
work under the scope of this License. 

3)    You may copy and distribute the Program (or a work based on it, under Section 2) in object code or 

executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: 
a)    Accompany it with the complete corresponding machine-readable source code, which must be 

distributed under the terms of Sections 1 and 2 above on a medium customarily used for software 
interchange; or, 

b)    Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no 

more than your cost of physically performing source distribution, a complete machine-readable copy of 
the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a 
medium customarily used for software interchange; or, 

c)    Accompany it with the information you received as to the offer to distribute corresponding source code. 

(This alternative is allowed only for noncommercial distribution and only if you received the program in 
object code or executable form with such an offer, in accord with Subsection b above.) 

The source code for a work means the preferred form of the work for making modifications to it.   
For an executable work, complete source code means all the source code for all modules it contains, plus 
any associated interface definition files, plus the scripts used to control compilation and installation of the 
executable. However, as a special exception, the source code distributed need not include anything that is 
normally distributed (in either source or binary form) with the major components (compiler, kernel, and so 
on) of the operating system on which the executable runs, unless that component itself accompanies the 
executable. 
If distribution of executable or object code is made by offering access to copy from a designated place, then 
offering equivalent access to copy the source code from the same place counts as distribution of the source 
code, even though third parties are not compelled to copy the source along with the object code. 

4)    You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this 

License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will 
automatically terminate your rights under this License. However, parties who have received copies, or rights, 
from you under this License will not have their licenses terminated so long as such parties remain in full 
compliance. 

5)    You are not required to accept this License, since you have not signed it. However, nothing else grants you 

permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if 
you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on 
the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for 
copying, distributing or modifying the Program or works based on it. 

6)    Each time you redistribute the Program (or any work based on the Program), the recipient automatically 

receives a license from the original licensor to copy, distribute or modify the Program subject to these terms 
and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted 
herein. You are not responsible for enforcing compliance by third parties to this License. 

7)    If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not 

limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) 
that contradict the conditions of this License, they do not excuse you from the conditions of this License.   
If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other 
pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a 
patent license would not permit royalty-free redistribution of the Program by all those who receive copies 
directly or indirectly through you, then the only way you could satisfy both it and this License would be to 
refrain entirely from distribution of the Program. 
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance 
of the section is intended to apply and the section as a whole is intended to apply in other circumstances. 
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to 
contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free 
software distribution system, which is implemented by public license practices. Many people have made 
generous contributions to the wide range of software distributed through that system in reliance on 
consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute 
software through any other system and a licensee cannot impose that choice. 
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this 
License. 

8)    If the distribution and/or use of the Program is restricted in certain countries either by patents or by 

copyrighted interfaces, the original copyright holder who places the Program under this License may add an 
explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in 
or among countries not thus excluded. In such case, this License incorporates the limitation as if written in 
the body of this License. 

Содержание SVMi-20i
























































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SVMi-20i

Lanner NCA-1526 User Manual preview
NCA-1526
Бренд: Lanner Страницы: 78
Juniper ACX2000 Hardware Manual preview
ACX2000
Бренд: Juniper Страницы: 190
Stephen STES2026 Configuration Manual Manual preview
STES2026
Бренд: Stephen Страницы: 102
ZyXEL Communications P-336M Quick Start Manual preview
P-336M
Бренд: ZyXEL Communications Страницы: 125
Parker PCH1 T P Series User Manual preview
PCH1 T P Series
Бренд: Parker Страницы: 107
ADTRAN NetVanta Serial Dial Backup Interface Module (DIM) none Quick Start Manual preview
NetVanta Serial Dial Backup Interface Module (DIM) none
Бренд: ADTRAN Страницы: 2
National Instruments PXI PXITM -1000 User Manual preview
PXI PXITM -1000
Бренд: National Instruments Страницы: 55
Keysight Technologies U3024AH10 User'S And Service Manual preview
U3024AH10
Бренд: Keysight Technologies Страницы: 106
Zhone 6388-A2 User Manual preview
6388-A2
Бренд: Zhone Страницы: 53
Matrix Switch Corporation MSC-2HD1624S Product Manual preview
MSC-2HD1624S
Бренд: Matrix Switch Corporation Страницы: 54
Riverbed SteelCentral NetExpress 470 Upgrade And Maintenance Manual preview
SteelCentral NetExpress 470
Бренд: Riverbed Страницы: 140
Billion BIPAC 7100G Quick Start Manual preview
BIPAC 7100G
Бренд: Billion Страницы: 14
Commax CVN-0430F User Manual preview
CVN-0430F
Бренд: Commax Страницы: 122
Oracle Database Appliance X6-2-HA Deployment And User'S Manual preview
Database Appliance X6-2-HA
Бренд: Oracle Страницы: 473
D-Link DSL-X1852E User Manual preview
DSL-X1852E
Бренд: D-Link Страницы: 141
D-Link DSL-G624T Quick Installation Manual preview
DSL-G624T
Бренд: D-Link Страницы: 72
MikroTik nRAYG-60adpair Manual preview
nRAYG-60adpair
Бренд: MikroTik Страницы: 7
Lakeside Alto Room Scaffold Instruction Manual preview
Alto Room Scaffold
Бренд: Lakeside Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды