Samsung SVMi-20i, Руководство пользователя

Страница: 188 / 247

Error! Style not defined.
188
© SAMSUNG Electronics Co., Ltd.
Item Description
Wait for
caller entry
This is the number of seconds, from 1 to 99, that the SVMi-20i waits
for an entry during the message editing and message retrieval
operation. The time begins at the moment that a prompt that
requests an entry from the caller is spoken. Upon entry of the first
digit, the time is reset so that the caller has the full Wait for Caller
Entry time to enter another digit.
Retries if
invalid entry
This specifies the number of times, from 0 to 99, that a caller may
re-enter his password if an invalid password was entered.
This also applies if a caller makes an invalid entry while recording/
editing a message.
Repeat
prompts no
entry
The number of times, from 1 to 99, to repeat prompts while the
caller is recording/editing a message.
Record
silence
timeout
This is the amount of time in seconds that the SVMi-20i will listen to
caller silence before assuming the caller has stopped talking.
Digit to
initiate fax
receipt
This is the digit to skip greeting and initiate to send a fax.
Digit for
operator
assistance
The Operator digit, when defined, allows the caller, while listening to
the subscriber’s personal greeting or recording a message, to press a
specific digit to transfer to the operator defined by the ‘OPERATOR’
pointer.
Digit to skip
greeting
The digit to skip the greeting, when defined, allows the caller, while
listening to the subscriber’s personal greeting, to enter a specific
DTMF digit to skip the greeting and enter record mode.
Digit to
escape
The Escape digit controls the following functions when using a
mailbox:
- In the mailbox public mode, if entered while the mailbox greeting is
being played or any time prior to the caller beginning to speak, the
message is canceled and the SVMi-20i exits the mailbox using the
<ESCAPE> pointer. If entered after the caller begins, it will
terminate the recording (just as with any other DTMF tone).
- It is used to exit from the opening menu of the mailbox or List box
user mode. The SVMi-20i will use the <USER-EXIT> pointer to
determine where to go next.
- In the mailbox or List box user mode, the Escape digit is generally
used as a ‘cancel’ key to abort the current operation and return to
the previous one.