Samsung SVMi-20i Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 247

Samsung SVMi-20i Скачать руководство пользователя страница 56

Error! Style not defined.

56

© SAMSUNG Electronics Co., Ltd.

MONITOR

Turns the Activity monitor on or off for one or all ports.
Syntax: MONIT [port|ALL|OFF]

NET

The net command is used in two ways:

1.

To show the current status of the SVMi network connection at the very
moment you typed NET and hit the

[enter]

key.

2.

Typing ‘net ON’ or ‘net OFF’ will toggle the state of network traffic
reporting as it pertains to the SVMi.

STATUS

Displays port status, available memory and hard drive space.
Syntax: STAT

PORTSTOP

Stops a port and puts it in the idle state.
Syntax: PORTSTOP [port]

UNLOCK

Returns a locked port to the idle state.
Syntax: UNLOCK [port]

LAN Port

The LAN port on the SVMi-20i is used for programming, backup and restore,
e-mail gateway, connecting to IP phones and trunks and uploading and
downloading files to and from the SVMi-20i. This connector is designed to
connect to the customer’s internal local area network (LAN) using a straight
through RJ-45 10/100/1000 Base-T cat5 cable.

The LAN port must use a static IP address.

Administration via LAN

Connect the LAN port of the SVMi-20i unit directly to a PC via a RJ-45
10/100/1000 Base-T cat5 direct cable.

«
...
54
55
56
57
58
...
»

Содержание SVMi-20i
























































































































































































































































Отзывы:

Нет отзывов