Samsung SVMi-20i Скачать руководство пользователя страница 209 | Manualshive

Страница: 209 / 247

Samsung SVMi-20i Скачать руководство пользователя страница 209

SVMi-20i User Guide

© SAMSUNG Electronics Co., Ltd.

209



‘Open access’ means a user on one system can reach a user on any other
system, using the same protocols, over the public telephone system
without exchanging passwords or requiring system administrator
involvement.



Mailbox numbers must be no longer than (16) sixteen digits.



Message length is limited to (8) eight minutes per message.



Non-delivery notification upon failure to deliver for any reason.
Reasons include invalid address, full mailbox, incompatibility between
systems, etc.



Sending and receiving system identification corresponding to an IDDD
number, consistent with the use of the public telephone system.



Identification of originating system identifier (IDDD number) and mailbox in
message envelope to facilitate tracking.



Provision and support for gateways, used to concentrate traffic and provide
for the connection of analog AMIS systems.



Network management reports consistent with reports available for intra-
vendor networked messages.

«
...
207
208
209
210
211
...
»

Содержание SVMi-20i
























































































































































































































































Отзывы:

Нет отзывов