Samsung SVMi-20i Скачать руководство пользователя страница 77

Страница: 77 / 247

SVMi-20i User Guide

(Continued)

Item

Description

Reboot at

Maintenance

The system can be set to reboot on a scheduled interval of either

Day, Weekly or Monthly. This is useful to help clear memory

buffers that fill up of data that is no longer being used.

When activated the reboot will occur after the system performs it’s

daily maintenance for that specified day.

Subscriber

Default

Password

The digits used as the default settings for extension and mailbox

passwords. The digit input may be from 1 to 8 digits in length.

When a mailbox or extension password is reset, this is the value

that the password will be reset to. The default setting is 0000.

Subscriber

PSWD Min

Length

This parameter defines the minimum number of digits used in a

subscriber’s password. A password can be equal to or larger than

this value.

If this value is changed to a larger value on a running system,

subscribers will be forced to change their password to one that

meets these requirements the next time they log in. The system

will prevent them from doing anything including listening to new

messages until they first change their password to meet the

minimum requirements. If ‘0’ is set, there is no minimum password

length. Valid values can be set from 0 to 8. The default is 0.

System Admin This affects the TUI (Telephony User Interface) access.

This password along with the remote login procedure gives the

administrator access to recording system prompts and overriding

the scheduling by engaging a specific mode.

Min Recorded

Length

This parameter sets the minimum record time that is to be

considered valid. It is specified in hundreds of seconds.

A setting of 50 means 0.5 seconds or 500 milliseconds.

The default value is 100. If this value is too high, short recordings

will be discarded. If it is too low, the system will consider

disconnects as a valid recording.

Dial Tone Trim

Size

This amount is trimmed off the end of any recorded message that

is terminated by dial tone. This parameter is measured in

hundreds of seconds. The default value is 150.

Содержание SVMi-20i
























































































































































































































































Результаты поиска

Содержание SVMi-20i

Отзывы:

Samsung SVMi-20i, Руководство пользователя, Страница: 77 / 247

Результаты поиска

Содержание SVMi-20i

Отзывы: