Samsung SVMi-20i, Руководство пользователя

Страница: 125 / 247

SVMi-20i User Guide
© SAMSUNG Electronics Co., Ltd.
125
(Continued)
Item Description
Wait for first digit This is the amount of time in seconds that the system waits for
the caller to enter the first digit.
Wait for
subsequent digits This is the amount of time in seconds that the system waits for
the caller to enter the digits following his first entry digit.
Repeat prompts if
no entry This is the number of times that the system repeats prompts if
the caller does not enter any digits.
Retries if no match This is the maximum number of names that a caller may enter
if no match is found on the digits that the caller entered.
If this occurs, it is considered an INVALID entry.
Maximum number
of matches This is the number of names played to a caller if more than
one name matches the entry. The number can be between 1
and 8.
Search based on
first name When an extension is set up, generally people are listed by
last name, comma, and first name.
This parameter determines which part of the name (label) that
will be searched for a match. For example, a name is entered
in the subscriber list as Smith, John. If this value is set to N
(no), the directory will search Smith.
If this value is set to Y (yes), the directory will search John.
Include unnamed
objects If this parameter is set to YES, search targets with no
recorded name will be included in the directory listing to be
played to a caller. In this case, the SVMi-20i announces the
number of the search target. This could, for example, be an
extension or mailbox number.
Speak name on
exit If this parameter is set to YES, the selected object’s name is
played to a caller prior to exiting the directory.
If no name is recorded, the selected object’s number is played
to the caller. This could, for example, be an extension or
mailbox number.
Speak key value
on exit If this parameter is set to YES, the selected object’s number is
played to the caller prior to exiting the directory.
Verify before exit If this parameter is set to YES, the system requests the caller
to confirm the object selection before transferring the caller to
that object. If it is set to NO, confirmation is not needed.
Type This is a list of the block type priorities for this particular
directory system to search. By default, the directory will
search for extensions first and then mailboxes.
Gp For each type that is entered, you must select the group
number of a group where the selected block type should be
search for. In almost all standard installations, you will only
search in group 01.