Understanding Your Contacts 70
Voice Method
Use the VoiceSignal Lookup command to view contact information for
any named contact stored in your Contacts list by saying the name.
Note:
The
Lookup
command shows the requested contact information in the
display but does not dial any phone numbers for the contact.
1.
In standby mode, press and hold
to launch VoiceSignal.
“
Say a Command
” appears in the display and is pronounced
through the speaker.
2.
Say “
Lookup
”.
VoiceSignal prompts you to “
Say the name.
”
3.
Speak clearly and say the full name of the person you want to
call, exactly as it is entered in your Contacts list.
•
If VoiceSignal recognizes the name you said, the Contact entry
information for that name appears in the display.
•
If VoiceSignal does not recognize the name you said, a choice list of up to
three names appears in the display, and VoiceSignal prompts you with
“
Did you say?
” followed by the first name on the list.
r260.book Page 70 Friday, March 18, 2011 11:57 PM
Содержание Chrono
Страница 14: ...9 Removing the battery cover 䊳 Pull up using the slot provided 1 while lifting the cover off the phone 2 ...
Страница 26: ...21 Side View 1 2 3 ...
Страница 28: ...23 Closed View of Your Phone 1 2 ...
Страница 30: ...25 Open View Front of Your Phone 1 3 4 5 7 10 11 12 13 14 8 2 9 6 ...