SAMES KREMLIN
Page 9
Manual : 573.176.112
Four lines of data are displayed, and continuously recalculated and updated:
- the pressure,
- the position,
- the Command,
- the dispensed weight.
On the bottom line of the screen the last fault is recorded.
To accept a Fault, go to the 'List of faults' page.
AUTO MODE
Auto Page
From this page, you have access to the following functions :
1 - Access to the Manu Mode function page (see 'Auto Page')
2 - Storage of the dispense weight data (see 'Weight Page')
4 - Access to the Inlets/Outlets page + Visualization (see 'Page Inlets/Outlet')
5 - Access to the Faults log (see 'Page Fault')
The 'manu' key of this page acts like a push-button. The function is active at the first press and inactive at
the second press. In case of a fault, the function automatically resets to the initial state (manual
mode).The selection of this page automatically resets the dispensed material weight.
The dispensed material weight is displayed until the start of a new extrusion cycle (i.e when the robot
sends a command to dispense).
No review is managed.
Nota : To select a new dispense weight, Change(shift) to Manual Mode.
Four information functions are performed successively :
- the pressure,
- the position,
- the command,
- the weight.
These are all recalculated and displayed continuously.
The lower line of the screen displays the last fault recorded. Go to 'List of faults' to accept a fault.
1
2
4
5