SAMES KREMLIN
Page 17
Manual : 573.176.112
SETTING PARAMETERS
Page for Inputing Parameters
Access to Parameters is via the '
MANU page
'.
From this page, you have access to the following functions :
From Pages 1 to 3 - Modification of control unit operating parameters.
4 - Back to the main page.
5 - Access to the function and to the fault log (see 'Fault page').
The '
' and '
' keys enable the selection of a parameter between the 26 options available.
All parameters have an individual commentary about its specific function.
The digital keyboard is only active in this mode.
All parameters are accessible for reading and modification.
Pressing the '
' ENTER key will validate any new data entered.
PARAMETER 01 : TYPE OF ROBOT INTERFACE
(connection mode between the robot and the REGULEX® used to code the flow information)
Mini. limit
Maxi. limit
Value for the first operating
01
04
04
Possible values
Interface type
01
Robot 4 bits
02
Reserved
03
External analog instruction
04
Internal analog instruction
PARAMETER 02 : MAXIMUM PRESSURE DURING FILLING, REGULATION OPERATIONS AND
EXTRUSION
(pressure threshold not to exceed in the chamber of the REGULEX®)
Mini. limit (bar)
Maxi. limit (bar)
Value for the first operating (bar)
10.0
150.0
50.0
1
2
3
4
5