SAMES KREMLIN
Page 20
Manual : 573.176.112
PARAMETER 15 : FLOW STANDRAD INSTRUCTION IN MANUAL APPLICATION
(defines the flow when the SB 1 manual application push button is input [In 1/10 Volt])
Mini. limit
Maxi. limit
Value for the first operating
00.0
99.9
10.0
Example : with a flow of 150cc : - P15 = 50
flow = 150cc/mn x 0.5
75cc/mn
- P15 = 10
flow = 150cc/mn x 0.1
15cc/mn
PARAMETER 16 : LANGUAGE CHOICE
Mini. limit
Maxi. limit
Value for Start up
1
3
1
Possible values
Language
1
French
2
Italian
3
English
4
Spanish
PARAMETER 17 : DENSITY OF THE APPLICATED MATERIAL
(Density of the fluid application in relation to water (%))
Mini. limit (%)
Maxi. limit (%)
Value for the first operating (%)
25
400
100
Example.: - Density = 1,35
135%
- Density = 0,8
80%
PARAMETER 18 : REGULEX® PISTON SECTION
(Piston section in mm² with 3 significative digit numbers, without decimal (refer to chart - § 10))
Mini. limit (mm
2
)
Maxi. limit (mm
2
)
Value for the first operating
(mm
2
)
01
4000
2205
PARAMETER 19 : TOLERANCE ON VARIATION OF APPLICATION WEIGHT FOR EACH CYCLE
Mini. limit (%)
Maxi. limit (%)
Value for the first operating (%)
01
20
5
PARAMETER 20 : TEST SIMULATION OF FLOW INSTRUCTION
(Internal simulation of the external instruction, usually sent by the robot. It is only active in mode 4
of this parameter 1. Value from 0 to 10 V, with only one decimal)
Mini. limit
Maxi. limit
Value for the first operating
00.0
99.9
10.0