Tel: 886.909 602 109 Email: [email protected]
72
measured and set.
The limit settings dialog box is shown below after turn on the limit.
Fig.3.79 Limit value setting
The limit setting dialog box is shown below after turn on the limit.
There are upper and lower limit settings for limit of Channel power and power bandwidth, rotating wheel or the
up/down keys to move the focus to the dialog box. Pressing the Enter key, we can edited and input number by
number key, the default unit is amplitude, then confirm input by soft-key or enter key.
If the limit measuring is enable and the value is between the upper and lower limits, it is qualified and marked by
green character, otherwise unqualified marked by red characters. If the limit is not enabled, the result is still
displayed in white characters. The result of limit on the top of the screen is the final test result. As long as there is a
failure of limit, the combined result was not qualified.
3.3.4 Basic usage
Basic usage refers to marker and peak functions.
1
．
Marker Function
Pressing
MARK
key, the following menu will pop up. It is about normal marker and delta marker. The theory is
same as Swept SA.
Содержание S5800E Series
Страница 1: ...S5800E Series Field Comm Analyzer User Manual Saluki Technology Inc...
Страница 14: ...Tel 886 909 602 109 Email sales salukitec com www salukitec com 14 Fig 1 2 Soft carrying case...
Страница 154: ...Tel 886 909 602 109 Email sales salukitec com www salukitec com 154 Fig 8 14 Limit file management dialog box...
