Tel: 886.909 602 109 Email: [email protected]
13
1.7 Battery Replacement
The battery can be replaced without any tool use. The battery compartment is located on the left rear side (when
the display is placed facedown). Remove the two screws, slide the cover down, and remove the battery.
Installation is the opposite operation of removal.
NOTE:
When inserting the battery, the battery label should face the back of the instrument and the guide slot
on the battery should be below the contacts. If the battery door is not latched, the battery may be inserted
incorrectly.
Fig.1.1 Battery compartment door
NOTE:
Use only batteries, adapters, and chargers provided with this instrument.
CAUTION:
When using the vehicle charger, make sure that the supply is rated for a minimum of 60 watts at 12
VDC, and that the socket is clean without any dirt or debris. If the adapter plug becomes hot to the touch during
charging, please discontinue use immediately.
NOTE:
Saluki recommends removing the battery for long-term storage of the instrument.
1.8 Soft Carrying Case
The S5800E series can be operated while in the soft carrying case. On the back of the case there is a large
storage pouch for accessories and power supply.
To install the instrument into the soft carrying case:
1
．
The front panel of the case is secured with hook-and-loop fasteners. Fully close the front panel of the
case. When closed, the front panel supports the shape of the case while you are inserting the S5800E.
2
．
Place the soft carrying case face down on a stable surface, with the front panel fully closed and laying
flat.
NOTE:
The soft case has two zippers near the back. The zipper close to the front of the case opens to
install/remove the instrument. The zipper close to the back of the case opens an adjustable support panel that
can be used to provide support for improved stability and air flow while the instrument is in the case. This
support panel also contains the storage pouch.
3
．
Open the zippered at the back of the case.
4
．
Insert the instrument face down into the case, take care that the connectors are properly situated in the
case top opening. You may find it easier to insert the connectors firstly, and then pull the corners over the
bottom of the S5800E.
Содержание S5800E Series
Страница 1: ...S5800E Series Field Comm Analyzer User Manual Saluki Technology Inc...
Страница 14: ...Tel 886 909 602 109 Email sales salukitec com www salukitec com 14 Fig 1 2 Soft carrying case...
Страница 154: ...Tel 886 909 602 109 Email sales salukitec com www salukitec com 154 Fig 8 14 Limit file management dialog box...
