Saluki S5800E Series, Руководство пользователя

Страница: 19 / 173

Tel: 886.909 602 109 Email: sales@salukitec.com
www.salukitec.com
19
Press the corresponding menu, and the parameter shows in the middle of the screen. Use the numeric keys, arrow
keys or Rotary Knob to set the parameter, and press the Enter key to exit.
Example: Menu of “Cent Freq”.
2
．
Enter the next submenu (no parameter)
Press the corresponding menu key to enter
the next submenu. These menus are marked by “>”.
Example: Menu of “Trace>”.
3
．
Enter the next submenu (with parameter)
Press the corresponding menu key to enter the next submenu to select an option, and then return to the previous
menu automatically. These menus are marked by “>”.
Example: Menu of “Detector Mode>”.
4
．
Active dialog box
Press the corresponding menu key, and there would be a dialog box popped up. These menus are marked by “=>”..
Example: Menu of “Limit=>”.
5
．
Implement the menu function
Press the menu key to implement the corresponding function.
Example: Menu of “Single Sweep”.
6
．
Two functions switch (no parameter)
Press the corresponding menu button to switch the two functions.
Example: Menu of “Log/Lin”.
7
．
Two functions switch (with parameters)
Press the corresponding menu button to switch the two functions, and then return to the previous menu
automatically.
Example: Menu of “Ref Offset”.
8
．
No operation
Some of the menu are not available unless the certain state.is met. No operation when the menu grays out.
Example: Menu of “Normal Detector Mode” in the fast sweep mode.
2.2.3 Symbols and indicators
The following symbols and indicators indicate the instrument status or condition on the display.
1
．
Calibration status OFF
: Calibration status OFF;
: Frequency response OFF.
2
．
Hold on
: Sweep Hold ON;
: Saving result of measure Hold ON.
3
．
Battery symbols
☆
Green: Battery is 30% to 100% charged;
☆
Yellow: Battery is 10% to 30% charged;