Saluki S5800E Series, Руководство пользователя

Страница: 63 / 173

Tel: 886.909 602 109 Email: sales@salukitec.com
www.salukitec.com
63
frequency/amplitude of current marker to center frequency/reference level.
4) Search Conditions
Press the "Search Para" key, and then the below menu will pop up. The search criteria are used to set the search for
peak conditions. The default of system is automatic mode. In auto mode, the "absolute level", "relative level" and
"relative points" cannot be changed. When set to manual mode, you can set up by entering values, up and down
keys and the roller, thus search the peak of conditions.
Fig.3.62 Search parameters
5) Peak-peak and Min Search
Press the "peak to peak" key on the top of the screen, and the amplitude of the highest frequency will be marked
within the span;
Press the "minimum" on the top of the screen, and the amplitude of the lowest frequency within the span will be
marked.
6) Peak Table
Peak table has the similar format as marker table. It can sort the found peaks by “Freq” or “Amp”pressing the “PK
Sort” soft-key. When setting the “PK Table” to “On”, the system will search 6 peaks and sort them with frequency
or amplitude. The default state is by amplitude. The frequency/time and amplitude information of these peaks will
display on the bottom of the screen. The peaks will change as the wave change.