Tel: 886.909 602 109 Email: [email protected]
84
2
．
Occupied Bandwidth %
Press "Occupied Bandwidth % key" to change the percent of Occupied Bandwidth. The default value is 99%. It
can also be changed by digital inputs, up and down key and knob.
3
．
Limit
The setup of limit is shown as following figure.
Fig.3.102 Limit value setting
The limit of occupied BW includes 3 items. User can enable limit line and input the value by limit dialog.
Only if the master switch is on, user can set up the limit value freedom.
When the limit value of occupied BW is the lower limit of occupied BW, and the value of occupied BW
measurement is greater than the value, it is qualified.
When the limit value of center spectrum is the absolute value of the center-frequency offset, and frequency offset
is less than the value, it is qualified.
When the value of channel power measurement is between the upper and lower limits, it is qualified.
The final result is passed only if each measurement item is qualified. Qualified, unqualified and disable are
marked by green, red and white color.
3.5.4 Basic usage
The content is about marker and peak.
1
．
Marker Function
The Fig.3.103 will pop up after pressing
MARK
key. It is about normal mark and delta mark. The theory is same
as spectrum scanning.
Содержание S5800E Series
Страница 1: ...S5800E Series Field Comm Analyzer User Manual Saluki Technology Inc...
Страница 14: ...Tel 886 909 602 109 Email sales salukitec com www salukitec com 14 Fig 1 2 Soft carrying case...
Страница 154: ...Tel 886 909 602 109 Email sales salukitec com www salukitec com 154 Fig 8 14 Limit file management dialog box...
