Sakai SW880-1, Руководство оператора

Страница: 24 / 111

1. BASIC PRECAUTIONS FOR SAFETY
– 20 –
■
Be careful of high pressure hydraulic fluid
• Bear in mind that the working equipment hydraulic
systems are under internal pressure. Do not perform
adding, draining, inspection or servicing of the hydraulic
systems until the internal pressure has been relieved.
Hydraulic fluid leaking through a fine hole at high
pressure can penetrate your skin and eyes.
Inspect leakage by holding a hard board close to
suspected leaks and wearing goggles. If affected by
high pressure oil, get medical help immediately.
■
Be careful of hot parts
• After the machine has been operated for some time, the
coolant, engine oil and hydraulic fluid will become hot.
• Removing the radiator cap or draining the coolant or
oil can burn you. Perform this work in accordance
with correct procedures after the systems have cooled
down.
■
Use care when inspecting or servicing fan or belts in motion
• Do not wear clothing and accessories that tend to get
caught in moving parts.
• Do not let your body or tools make contact with the fan
blades or belts. They can be cut seriously.
■
Used oil disposal
• Do not throw used oil into a drain or waterway. Drain
the oil from the machine into a proper container. Do not
drain directly on the ground.
• Obey all local, state and federal environment
regulations for the proper disposal of oil, fuel, coolant,
battery electrolyte or any other fluids.
WARNING: Negligence of these instructions can lead to accidents.