Sakai SW880-1, Руководство оператора

Страница: 46 / 111

2. OPERATION
– 42 –
2) Remove the plugs (2 locations) from the motor.
NOTE: Conduct the work rapidly, as the oil will gush out when the plugs are taken off.
3) Screw in the removed bolts with the washers into the plug holes. Screwing in them until
they become a little tight will disengage the brake.
NOTE: Wash clean the brake release bolts and blank plugs before fitting to the motors.
4) After towing, replace the bolt and washer to original position and tighten the plug securely
to the motor.
2.2.4 Steering wheel position adjustment
1) Pull the lever
ⓐ
upward. Doing so disengages the lock
off the wheel.
2) Position the wheel for your operating comfort.
3) Lower the lever
ⓐ
to lock the wheel in place.