Sakai SW880-1, Руководство оператора

Страница: 18 / 111

1. BASIC PRECAUTIONS FOR SAFETY
– 14 –
■
On a step slope, run the machine at low speed
■
When parking
• Select level and hard ground. If necessary to park on
a slope, block the front of the drums and tire on the
downside of the slope.
• When required to park on a public road, provide
necessary markings such as flags, barriers and
illumination.However, be sure they do not obstruct
traffic.
• Stop the engine when getting off the machine. Remove
the key from the starter switch, and make sure it is
stored appropriately.
• Be sure not to get your hands caught in the blocks
when handling them.
1.6 Loading and Unloading
• Loading and unloading can accompany any danger.
Use extreme care.
• Select level and hard ground leaving a sufficient
distance from the shoulder of a road or bank.
• Use sturdy ramps with proper width, length and
thickness which allow safe loading and unloading. If
they deflect considerably under load, apply wooden
blocks to reinforce the ramps.
• To prevent your machine from crosswise slippage, keep the ramps free from oil, mud,
debris, etc. The drum must also be free from extraneous matter that can cause slippage.
• Do not steer your machine on the ramps. If the machine is facing in the wrong direction, go
back off the ramp the ramps, correct the direction and try again.
• Do not use kinked, twisted or damaged wire ropes for crane or winch operation. Use ones
with ample strength.
• When loading is complete, fix the machine with wooden blocks placed under the drums
and chains fastened to the machine.
1.7 Transportation
• Follow required regulations.
• Select a transporting route according to the overall width, overall height and gross weight of
the trailer with the roller loaded.
• Know the maximum height clearance of the machine loaded on the transport trailer before
hauling under bridges and other structures.
WARNING: Negligence of these instructions can lead to accidents.