Sakai SW880-1, Руководство оператора

Страница: 73 / 111

2. OPERATION
– 68 – – 69 –
CAUTION
Failure to follow this procedure can result in sever engine damage.
Fill : 1) Fill coolant at 3 gallons per minute (12 liters per minute) until coolant
reaches the bottom of the fill neck. Wait for 1 minute, then top up coolant
to the bottom of the fill neck if needed.
2) Start engine and run at “mid” speed for 1 minute or until engine warning
lamp comes on.
3) Turn off engine and top up coolant to bottom of fill neck if needed.
4) Replace coolant cap.
WARNING
• Do not remove the radiator cap while the coolant in hot.
• Hot water may be spouted out that can cause scald.
Relieve pressure by slowly turning the cap after the
water temperature is dropped, then remove the cap.