Sakai SW880-1, Руководство оператора

Страница: 40 / 111

2. OPERATION
– 36 –
Engine diagnostic switch
Engine troubleshooting can be conducted using the
trouble code selector switch.
During normal operation, do not operate switches.
Set switch as shown in " " position during the normal
operation.
See 2.2.7 Engine diagnoses page 44 for detail.
" " position : Engine diagnostic is activated
" " position : Engine diagnostic is shut off
IMPORTANT
When operating the trouble code selector switch, see the engine manual.
Emergency propel switch
Propel the machine with this switch if the machine can’t
be propelled with F-N-R lever.
Sometimes called a “ limp home ” switch, this function will
only work after MANUALLY plugging in the appropriate
wire harness connection.
See 2.3.4 Traveling page 50 for the detailed procedure on
how to plug in the wire harness.
AUTO SPEED set switch
The AUTO SPEED set switch is the top button on the
F-N-R lever.
The speed that the roller is traveling at when the button
is depressed will be recorded into memory. The Button
must be depressed and held for at least one second.
When auto speed is set, the machine will run at the preset
speed when the F-N-R lever is moved to the full forward
or full reverse position.
The auto speed memory is cancelled when the button is pushed a second time and held for
one second or longer.
See 2.3.6 AUTO SPEED page 52 for full operational instructions.