Sakai SW880-1, Руководство оператора

Страница: 56 / 111

2. OPERATION
– 52 –
2.3.6 AUTO SPEED
2.3.6.1 Setting
The machine propel speed can be memorized by the machine controller and the speed is
controlled automatically. It will help to easily control your speed to a preset value when a
certain speed is required on the work site.
NOTE: The AUTO SPEED function only operates when the Engine Speed selection switch is
set to FULL and the Propel speed selection is in the “ ” position.
NOTE: The minimum allowable AUTO SPEED setting is 1.5 miles per hour.
1) With the machine in moving at the desired AUTO
SPEED setting, press the TOP button on the F-N-R
lever and hold for at least one second to set the AUTO
SPEED equal to the current machine speed.
2) Check the AUTO SPEED lamp
If the AUTO SPEED is successfully set up in Step 1,
the AUTO SPEED lamp will remain lit. If the lamp is not
illuminated, repeat Step 1.
3) After setting the AUTO SPEED in Step 1, move the
F-N-R lever to the neutral position
Ⓝ
.
The AUTO SPEED feature is now set so that the
machine will travel at the preset speed when the F-N-R
lever is in the full forward or full reverse position.
CAUTION
Do not change the IPF / Vibration Frequency / Vibration Amplitude / Propel Speed /
Engine Speed switch setting after setting the AUTO SPEED without first canceling
the AUTO SPEED. Doing this will cause the AUTO SPEED lamp flicker until the IPF
/ Vibration Frequency / Vibration Amplitude / Propel Speed / Engine Speed switch
is set back to the position it was in when AUTO SPEED was set.