Sakai SW880-1, Руководство оператора

Страница: 36 / 111

2. OPERATION
– 32 –
Vibration mode selector switch
" " position : Vibration can be controlled by the
vibration switch on the F-N-R lever
" " position : Vibration is shut off
AUTO position : Vibration automatically engages when
the F-N-R lever is moved into the forward
or reverse
NOTE: For vibratory compaction, the “ Engine Speed ” selection switch must be in the FULL
position.
The vibrator indicator lamp stays lit at all times when the machine is running in vibratory
mode.
IMPORTANT
• Do not operate the vibrator on a hard area such as cement concrete pavement
surface or the ground covered by thick steel sheets.
• Turn the vibrator off when the machine is at rest.
• Shut off the vibrator immediately if the machine gets stuck in the mud during
vibratory operation.
Vibration drum selector switch
" " position : Only the front drum will vibrate
" " position : Both drums will vibrate
" " position : Only the rear drum will vibrate
Vibration amplitude selector switch
" " position : Low amplitude vibration
" " position : High amplitude vibration
NOTE: Selection is applied only when the F-N-R lever is
in the neutral position.