SAF Integra, Руководство пользователя, Страница: 84 / 94

INTEGRA/-S/-G/-GS User Manual WEB GUI
SAF Tehnika JSC
84
Modify mode
1) Clear alarm log – deletes all alarm log entries;
2) Toggle period selection – opens/closes period selection controls;
3) Load the latest data – refreshes alarm log and shows last 20 log entries;
4) List of alarm log entries – entry number, date and time, source node, status, and
event name;
5) Navigation controls. “<<” navigates to the start of the alarm log, while “>>” – to the
end; “Previous 20” navigates to the previous alarm log page showing 20 previous
alarm log entries (if available) , while “Next 20” – to next alarm log page showing 20
next alarm log entries (if available).
6) Shows the number of the currently viewed alarm log page. You can enter the specific
page number to navigate to the required page;
7) Filter – press to filter alarms from a certain source node (e.g. Radio);
8) Alarm event log file – press the link to download the full alarm log text file.
CLI commands ( Chapter 4: COMMAND LINE INTERFACE )
log event show last <#_of_entries> Use to show a certain number of last alarm log entries.
log event show time <starttime>
[<endtime>]
Use to show entries from a certain time point. The
following formats are supported:
YYYY-MM-DD/hh:mm:ss; MM-DD/hh:mm:ss;
MM-DD/hh:mm; hh:mm:ss; hh:mm
log event show sensor <sensor>
[last <#_of_entries>] [time
<starttime> [<endtime>]]
Use to show entries for a specific sensor. Regarding
subcommands “last” and “time” refer to the commands
above.
log event show module {modem|
psu | radio | system | alarm_only |
iman} [last <#_of_entries>] [time
Use to show entries for a specific module. Regarding
subcommands “last” and “time” refer to the commands
above.