
INTEGRA/-S/-G/-GS User Manual WEB GUI
SAF Tehnika JSC
53
Modify mode after enabling header compression
Explanation of status/configuration fields:
1)
Header compression
–
Indicates whether header compression is enabled or disabled.
2)
Header compression profile
–
Indicates which header compression profile is selected
(status mode); allows choosing compression profile and thus enabling header
compression or disabling it using the
“None” profile (modify mode).
3)
Number of compressed flows for engine 1
–
Indicates the number of compressed
entries for engine #1. The maximum is 2048.
4)
Number of compressed flows for engine 2
–
Indicates the number of compressed
entries for engine #2. The maximum is 2048.
5)
Average compression gain - Net
–
Indicates compression percentage between
ingress and egress data.
6)
Average compression gain - Gross
–
Indicates compression percentage between
ingress and egress data including GFP (Generic Framing Procedure) overhead.
7)
By pressing
„Execute configuration”
,
changes made to the corresponding section
apply only to the local side
Integra/Integra-S/Integra-G/Integra-GS
. If
„Rollback on”
is
selected, the configuration will be reverted in case erroneous configuration changes
are applied.
Pressing
„Execute for both”
applies changes made to the corresponding section both
for local and remote side
Integra/Integra-S/Integra-G/Integra-GS
FODUs.
CLI commands (
Chapter 4: COMMAND LINE INTERFACE
modem hc preset
{none|default}
Use to enable (preset “default”) or disable (preset “none”)
header compression.
modem hc statistics
Use to show head compression statistics.
Over The Air
→
Security
→
AES encryption
Enabling AES encryption provides payload data encryption over the air using Advanced
Encryption Standard (AES).
For more details see
AES - Advanced Encryption Standard
Содержание Integra
