
INTEGRA/-S/-G/-GS User Manual WEB GUI
SAF Tehnika JSC
69
Networking
→
Ethernet
→
Port status and configuration
Shows the status of Ethernet switch ports, allows enabling and disabling the ports, Flow
control, and modifying link speed/duplex.
Status mode
Press
button.
Modify mode
1)
Port
–
Indicates available switch ports.
2)
State
–
Indicates operation status of each LAN port (status mode); allows
enabling/disabling each LAN port (modify mode).
“(Restricted)” will be indicated on
the LAN2 port if 2+0 aggregation or 1+1 protection is enabled.
3)
Link status
–
Indicates whether a link with the appropriate port is established as well
as its link speed.
4)
Link speed
–
Indicates whether link speed is configured to automatic speed setting or
manual (status mode); allows changing link speed to the manual setting (modify
mode).
LAN2 and LAN3 (SFP ports) support Auto Gigabit (1000FDX) only and cannot be modified.
Maximum L2 frame size supported in 1000FDX mode is 9600B, while in 100FDX mode
(LAN1)
–
9070B.
5)
Flow control
–
Indicates whether flow control is enabled or disabled on a particular
port (status mode); allows enabling/disabling flow control on each available port
(modify mode). The default setting is disabled.
Содержание Integra
