SAF Integra, Руководство пользователя, Страница: 14 / 94

INTEGRA/-S/-G/-GS User Manual INSTALLATION
SAF Tehnika JSC
14
Antenna alignment
Tools required : 13mm (0.512”) wrench (comes in the
package)
1
Before aligning the antenna, make sure that
screws marked with red dots on the right side
view of the mounting bracket are loosened -
hex flange nuts and bolts of azimuth and
elevation eye screws, right side screw on
Integra/Integra-G FODU, and hex flange bolt on
azimuth angle indicator.
2
Additionally loosen the following screws
marked with red dots on the left side view of
the mounting bracket: the left side screw on
Integra/Integra-G FODU and two hex flange
bolts between both mounting bracket clamps
for housing and pipe.
3
For initial alignment make sure that elevation is
approximately at zero degrees angle by
adjusting hex flange nuts [9] on the vertical
alignment eye screw so that Integra/Integra-G
housing is parallel with the bracket.
4
Adjust the azimuth angle by manually moving
the mounting bracket in the horizontal axis.
Note that all azimuth position fixing hex flange
bolts, as well as the horizontal alignment eye
screw with flange bolts need to be loosened
ensuring free movement in the horizontal axis.
5
Each notch corresponds to one degree of
azimuth angle. The half distance between
notches (each lip) corresponds to 0.5 degrees.
6
Fix the azimuth angle on the horizontal axis by
adjusting the position of flange nuts [6] on both
horizontal and vertical alignment eye screws.