
INTEGRA/-S/-G/-GS User Manual INSTALLATION
SAF Tehnika JSC
13
7
Hex flange nuts should be evenly aligned on
threaded bolts so that the mounting bracket
clamp [9] is tightly attached to the pipe. Tighten
hex flange nuts with torsion not exceeding 20
N·m.
8
View of the assembled mounting bracket on the mast
pole.
9
Make sure that both horizontal and vertical
alignment eye screws are turned to the mast
before attaching Integra/Integra-G FODU.
10
Attach Integra/Integra-G FODU with the antenna to the
mounting bracket so that side screws fit into the
grooves of the housing clamp [5].
11
Connect the vertical alignment eye screw [3] to
the upper groove on Integra/Integra-G housing.
12
View of the assembled bracket on the mast pole with
Integra/Integra-G FODU attached and secured.
It is recommended to protect the installed radio from
direct sunlight.
Содержание Integra
