SAF Integra, Руководство пользователя, Страница: 10 / 94

INTEGRA/-S/-G/-GS User Manual INSTALLATION
SAF Tehnika JSC
10
4 M8x160 and M8x130 threaded rods
5
Clamps for housing and pipe interconnected with three M8x1.25x16 hex flange bolts [1]
and an eye screw for horizontal alignment [2]
6 Six M8x1.25 hex flange nuts
7 Three M8x1.25 hex nuts
8 One hex flange bolt M8x1.25x20
9 Mounting bracket clamp
# Parts of Integra/Integra-G FODU
10 Spacer hex flange nut
11 Lifting eye nut
12 Fixation plate
13 Side screw flange nuts
14 Grounding flange nut
The numbers of the mounting bracket and Integra/Integra-G FODU parts in the next sections
will be mentioned in square brackets [ ].
Changing the polarization of Integra/Integra-G FODU and antenna
Tools required : 13mm (0.512”) wrench (comes in the
package)
The default polarization for licensed frequency band radios is vertical.
Integra series 17/24GHz FODUs should be installed in opposite polarizations.
By default, Integra series 17/24GHz FODU radios are shipped with opposite polarizations
pre-installed for low and high side units.
11
13
10
12
14