SAF Integra, Руководство пользователя, Страница: 59 / 94

INTEGRA/-S/-G/-GS User Manual WEB GUI
SAF Tehnika JSC
59
mode on LAN and WAN ports (modify mode). On the LAN ports changing from T to U
will change the previous untagged VLAN ID on the same port to T (trunk) mode and
will highlight this change in yellow color. Note that only a single U (untagged) VLAN ID
can be configured on each available port.
6) MNG – indicates management VLAN ID (status mode); allows specifying which
individual VLAN ID will be used for management access (modify mode).
7) Add – Press “Add” to add entered individual VLAN ID or VLAN ID range or press red
cross (
×
) to delete VLAN entry;
8) By pressing „Execute configuration” , changes made to the corresponding section
apply only to the local side Integra/Integra-S/Integra-G/Integra-GS . If „Rollback on” is
selected, the configuration will be reverted in case erroneous configuration changes
are applied.
CLI commands ( Chapter 4: COMMAND LINE INTERFACE )
network vlan set mng
<1…4094>
Use to set Management (MNG) VLAN ID.
network vlan set mode
{disable|enable|qinq}
Use to set VLAN operation mode. “ disable ” – packets
ingress/egress unmodified; “ enable ” – packets are
handled according to VLAN configuration; “qinq” - packets
are handled according to VLAN configuration for QinQ.
network vlan set mode qinq
tpid
<0x0001...0xFFFF>
Use to set tag protocol identifier (TPID) for S-TAG.
network vlan set vid <1…4094>
add {tagged|untagged}
{LAN1|LAN2|LAN3}
Use to add VLAN ID as a tagged (trunk) or untagged
(access) type on a specified port.
network vlan set vid <1…4094>
delete {LAN1|LAN2|LAN3|WAN}
Use to delete VLAN ID on a specified port.
network vlan set vid <1…4094>
name <name>
Use to name a VLAN ID. The same name can be applied
for multiple VLAN IDs.
network vlan set vid <1…4094>
rate <name>
Use to apply existing rate profile to a VLAN ID. Please refer
to Chapter
Networking → Ethernet → VLAN rates .
network vlan set vid <1…4094>
remove
Use to remove the defined rate profile from a VLAN ID.
network vlan set default priority
<0…7>
Use to set default VLAN priority value for untagged
packets.
network vlan set default vid
<1…4094>
Use to set default VLAN ID for untagged packets.
network vlan show summary Use to show general VLAN configuration summary.
network vlan show default Use to show the configuration of untagged packets.
network vlan show mng Use to show Management (MNG) VLAN ID.
network vlan show mode
Use to show current VLAN operational mode and custom
EtherType ID.
network vlan show vids Use to show currently configured VLAN IDs on all ports.
Networking
→
Ethernet
→
VLAN rates
The VLAN rates page allows configuring rates for selected VLANs.