10
GB
CAUTION
When setting the cutting height, hold the setting lever as depicted in the illustration I . In this way, the hand is
prevented from sliding off and getting injured when setting.
Pos: 7.1 /-- -- --- --- 1 L eer zeile --- --- -- -- @ 0\m od_ 111 461 178 714 0_15 21. doc @ 207 0
Pos: 7.2 /Inn enteil/V or d er Er sten Inb etrie bna hme /1 VOR DER ERSTEN INBE TRIEBNAHME MÄHER @ 0 \mo d_1 115 2105 278 28_ 152 1.doc @ 1 709
8
BEFORE USING THE LAWNMOWER FOR THE FIRST TIME
Pos: 7.3 /Inn enteil/Sic her heitshi nweise/Sic her heitshi nweis: St ein @ 0\m od_ 1115 200 949 078 _15 21.d oc @ 153 7
Safety instruction!
See table for explanation of symbols page 3
Pos: 7.4 /Inn enteil/V or d er Er sten Inb etrie bna hme /Allgem eine Sich erh eitshi nweise Be nzin mähe r @ 20\ mod _13 496 8373 514 0_1 521. doc @ 15 622 0
Check that all connections and the spark plug connector are fitted firmly. Tighten the screws if necessary! In particular make
sure that the cutter bar is fitted correctly (see Chapter “Maintenance of the blade”).
The blade attachment screw must always be tightened by an authorised workshop. If the blade attachment screw is too tight
or too loose, the blade clutch and blade can be damaged or become detached, which can cause severe injury.
Make sure that all safety devices are fitted properly and are not damaged.
Pos: 7.5 /Inn enteil/V or d er Er sten Inb etrie bna hme /1.1 Öl ein füllen (Abbil dung Y1 ) @ 0\ mo d_11 152 109 610 78_ 152 1.doc @ 1 711
Filling with oil (Illustration Y1 )
Pos: 7.6 /Inn enteil/Sic her heitshi nweise/Sic her heitshi nweis: Expl osion @ 0\ mod _11 152 106 186 40_1 521 .doc @ 15 27
Safety instruction!
See table for explanation of symbols page 3
Pos: 7.7 /Inn enteil/V or d er Er sten Inb etrie bna hme /Öl ein füllen Hinweis Mot or JS6 3 @ 3 \mo d_1 158 825 745 978_ 152 1.d oc @ 2 035 3
IMPORTANT
Avoid damage! Engine is delivered without oil. You must add oil before running the engine.
Pos: 7.8 /Inn enteil/V or d er Er sten Inb etrie bna hme /Öl ein füllen Te xt M otor B&S @ 3\m od_ 115 882 511 272 3_15 21. doc @ 203 43
Before starting the mower the first time fill motor oil (for quantity and type, see technical data) into this opening with a funnel
after unscrewing the dipstick.
– Park mower on a level surface.
– Pour in oil slowly into the oil filler. Do not pour in too much oil.
– Check the oil level.
Remove the dipstick. Wipe the dipstick with a clean cloth, insert the dipstick into oil filler and re-tighten. Then remove
the dipstick once again and read off the oil level. The oil must be between the marks "ADD" and "FULL". Add oil if
necessary. However the oil level should not be above "FULL" mark. Replace oil dipstick and retighten.
– After filling up for the first time remove the “NO OIL” sign on top of the engine.
Pos: 7.9 /Inn enteil/V or d er Er sten Inb etrie bna hme /1.1 Krafts toff einfüll en @ 0\m od_ 111 521 1956 203 _15 21.d oc @ 171 0
Filling with fuel
Pos: 7.1 0 /In nent eil/Siche rheits hinweis e/Siche rheits hinweis: Explosio n, Benzi n @ 0\mo d_1 115 211 811 093 _152 1.d oc @ 1528
Safety instruction!
See table for explanation of symbols page 3
Pos: 7.1 1 /In nent eil/Vor der Erste n In betri ebn ahm e/Kra ftstof f einf üllen Tex t mit K raftst offh ahn (A) (nu r fü r M odell mit Z usatz tank ) @ 20\m od_ 134 968 474 521 7_15 21. doc @ 156 730
– Only fill the tank with fresh and clean unleaded standard petrol.
Fuel with up to 10% ethanol content is acceptable.
– Fuel tap should be closed
A
(only on model with additional tank).
– Unscrew the fuel filler cap.
– Use a funnel to fill the fuel up to the max. lower edge of the filling nozzle.
– Replace the fuel filler cap and screw tight.
Pos: 8.1 /-- -- --- --- 1 L eer zeile --- --- -- -- @ 0\m od_ 111 461 178 714 0_15 21. doc @ 207 0
Pos: 8.2 /Inn enteil/St art en d es M oto rs/1 S TARTEN DES MO TORS @ 2\m od_ 114 709 476 0724 _15 21. doc @ 127 43
9
STARTING THE ENGINE
Pos: 8.3 /Inn enteil/Sic her heitshi nweise/Sic her heitshi nweis: Fuss, Stein, A bstan d @ 0\mo d_1 115 212 854 781 _152 1.d oc @ 1529
Safety instruction!
See table for explanation of symbols page 3
Pos: 8.4 /Inn enteil/St art en d es M oto rs/Allge meine Sicher heits hinweise Seiten auswu rf @ 0\m od_ 111 521 298 7875 _15 21. doc @ 173 5
Only start the engine when standing behind of the mower. Never stand on ejection side!
Place the mower on a level surface where the grass is not too high (high grass inhibits the start of the cutter bar and makes
starting more difficult). Where this is not possible, position the mower in such a way that the cutter is facing diagonally away
from the user, although only as far as absolutely necessary.
Pos: 8.5 /Inn enteil/St art en d es M oto rs/Star ters eilgrif f wäh ren d de s Start ens fest umfa ssen Hi nweis @ 13\ mod _12 802 340 454 62_ 1521 .doc @ 1 1021 8
CAUTION
Hold the starter cable handle firmly when starting. The handle may otherwise slip out of your hand. Risk of injury!
Pos: 8.6 /Inn enteil/St art en d es M oto rs/Hinweis : WICHT IG @ 0\m od_ 1115 213 366 156 _15 21.d oc @ 173 7
IMPORTANT
The motor only operates when the safety control bracket is pressed against the upper part of the handlebar. As
soon as the safety control bracket is released, this returns to its original position under spring force, the motor
brake is actuated, and the motor and blade come to stop within three seconds.
Pos: 8.7 /Inn enteil/St art en d es M oto rs/1. 1 52 -PRO S A (A bbildu ng Z + E ) @ 2 0\mo d_1 349 763 889 326 _152 1.d oc @ 1 568 74
