RS PRO RSDM-9060, Руководство пользователя

Страница: 81 / 412

81
Editing 1st or 2nd
measurement
item settings
After the secondary measurement function has
been activated, the rate, range and measurement
item can be edited for either the primary or
secondary display. Note, however, it is more
practical to configure the first or second
measurement items before activating dual
measurement mode.
To edit measurement parameters in dual
measurement mode, you must first set which
display is the active display. The orange outline
covering either 1ST or 2ND icon indicates the
active display.
1. Select active
display
Toggle the active display between the
1ST and 2ND display by pressing the
Knob key:
Primary display: 1ST highlighted in
orange outline.
Secondary display: 2ND highlighted in
orange outline.
Display
1ST in active display:
2ND in active display:
2. Edit active
display settings
Edit the range, rate or measurement item for the
active display in the same way as for single
measurement operation.
Turn Off 2nd
Measurement
To turn Off the 2ND measurement, first
toggle in 1ST active display followed by
pressing the F6 (2ND) key. Click the F6
(OFF) key again to disable the 2ND
measurement.