RS PRO RSDM-9060, Руководство пользователя

Страница: 8 / 412

8
rspro.com
Power Supply
WARNING

AC Input voltage: 100/120/220/240 V AC
±10%, 50Hz / 60Hz / 400Hz ±10%

The power supply voltage should not fluctuate
more than 10%.

Connect the protective grounding conductor of
the AC power cord to an earth ground to
prevent electric shock.
WARNING
(RSDM-9061
only)

Due to the fact that the Front/Rear Input Switch
on the front panel is not proposed as an active
multiplexer, do Not change the input switch
when signals are present on either rear or front
set of terminals. Intrument damage and risk of
electric shock may occur if switching the input
switch when high voltage or current is present.
Fuse
WARNING

Fuse type: T0.25A 100/120 VAC
T0.125A 220/240 VAC

Make sure the correct type of fuse is installed
before power up.

To avoid risk of fire, replace the fuse only with
the specified type and rating.

Disconnect the power cord before fuse
replacement.

Make sure the cause of a fuse blowout is fixed
before fuse replacement.
Cleaning the
function
generator

Disconnect the power cord before cleaning.

Use a soft cloth dampened in a solution of mild
detergent and water. Do not spray any liquid
into the RSDM-9060/9061..

Do not use chemicals containing harsh products
such as benzene, toluene, xylene, and acetone.