RS PRO RSDM-9060, Руководство пользователя

Страница: 345 / 412

345
[SENSe:]PERiod:TIMeout:AUTO?
Returns the assigned timeout time used for the period
function.
Return parameter: 0 | 1, 0:timeout time = 1 second, 1:timeout
time is different in according with ac filter bandwith (gate
time).
[SENSe:]PERiod:TRIGger:DELay
Sets the trigger delay time that minimum step is microseconds
of Period measurement.
Parameter: <NRf> (0 ~ 3600 s) | MIN | MAX | DEF
Example: SENS:PER:TRIG:DEL 0.05
Sets the trigger delay time to 50ms of Period measurement.
[SENSe:]PERiod:TRIGger:DELay?
Returns the trigger delay time in seconds of Period
measurement.
Return parameter: <NRf>
[SENSe:]PERiod:VOLTage:RANGe
Sets the period measurement range.
Parameter: Range(<NRf> | MIN | MAX | DEF)
Example: SENS:PER:VOLT:RANG DEF
Sets the period to the default range.
[SENSe:]PERiod:VOLTage:RANGe?
Returns the period measurement range.
[SENSe:]PERiod:VOLTage:RANGe:AUTO
Sets the Period Auto-range settings on, off or once.
Parameter: 0 | 1 | ON | OFF | ONCE
Example: SENS:PER:VOLT:RANG:AUTO OFF
Turns the Auto-range setting off for period measurements.
[SENSe:]PERiod:VOLTage:RANGe:AUTO?
Returns the Period Auto-range setting.
Return parameter: 0 | 1, 0=OFF, 1=ON
SENSe TEMPerature Commands
[SENSe:]TEMPerature:NPLCycles
Sets the integration time for Temperature measurement in
PLCs (power line cycles). Where one PLC is equal to 16.6
milliseconds. For any <NRf> parameter, the DMM will
automatically set the PLC to the closest acceptable PLC value
(1 | 3 | 12).
Parameter: NPLCycles(<NRf> | MIN | MAX | DEF)