G A L A X Y ® A U R O U R A C O N F I G U R A T I O N A N D S Y S T E M I N T E G R A T I O N G U I D E
61
Section 2 Basic Setup
The ‘completing the simple volume..’ window opens. This is the final window of
the wizard, which shows all of the settings that were selected and provides the
last chance to go back and make any changes before the LUN is formatted
and volume created on it. If everything looks OK, click on the Finish button to
continue:
When the partitioning is finished, the New Simple Volume Wizard will close,
and you will be returned to the Disk Management screen. After a few moments
(less than a minute), the Disk Management screen will update the information
about the new volume as follows, and your volume is ready to use: