G A L A X Y ® A U R O U R A C O N F I G U R A T I O N A N D S Y S T E M I N T E G R A T I O N G U I D E
54
Section 2 Basic Setup
mkdir /root/bob[enter]
chmod 777 /root/bob[enter
]
mount /dev/sdb1 /root/bob[enter
]
Once the mount point is created, it doesn’t have to be recreated each time –
just use the mount command.
Your Aurora LUN is now available for use by Linux clients.
2.2.6
Windows Client RAID Connections and LUN Preparation
After the Window InfiniBand drivers are installed or the Fibre channel HBA
drivers are installed and loaded (which is not covered in this manual), system
rebooted and cabled to the array, begin by left-clicking on the Windows logo
(Or Start Menu) in the lower left corner of the screen: Note that the
instructions here are for Vista Ultimate/64 but other versions are similar.
