Roland V-Drums TD-8, Руководство пользователя

Страница: 85 / 224

85
Chapter 2 Making the Settings for Drum Instruments
Chapter 2
Adjusting Drum Sounds
(V-EDIT)
V-EDIT and EDIT
Methods used for editing kicks, snares, and toms differ
according to the type of instrument.
V-EDIT
This allows you to select a head type, change the shell
depth, add muffling, or in the case of the snare drum,
you can turn the snares off.
EDIT
You can adjust only the two parameters “PITCH” and
“DECAY.”
When V-EDIT can be used
V-EDIT is only possible in the following group names “V-
KICK,” “V-SNARE,” or “V-TOM.” For instruments in other
instrument groups, pitch and decay are adjusted.
The following icon appears in the edit screen
for instruments which can be edited using V-
EDIT.
fig.03-003a
Choosing the Shell Depth
Changing the depth of the drum shell will change the tone.
You can select any of these five levels of depth for the snare:
“NORMAL,” “DEEP1,” “DEEP2,” “DEEP3,” and “DEEP4.”
Making the shell deeper will increase the richness of the low
range, and make the sound “fatter”.
fig.03-004
Instrument group names that can be edited
V-KICK, V-SNARE, V-TOM
1.
First press [KIT], then [F1 (INST)], then [F2 (EDIT)], and
then [F1 (SHELL)].
[KIT] lights, and the “SHELL” screen appears.
2.
Strike a pad.
The settings screen for the struck pad appears.
3.
Press CURSOR [ ] to move the cursor to “DEPTH.”
4.
Press [INC/+] or [DEC/-] or rotate the VALUE dial to
make the setting.
5.
Press [KIT].
The “DRUM KIT” screen appears.
DEPTH:
V-KICK: NORMAL, DEEP
V-SNARE: NORMAL, DEEP1, DEEP2, DEEP3, DEEP4
V-TOM: NORMAL, DEEP
• Changing the “shell depth” of an instrument will boost the
overall sound level. Be careful.
• When the instrument is changed, the “DEPTH” setting
returns to “NORMAL.”
When selecting an instrument both the head and rim of
which can be edited with V-EDIT, settings such as shell
depth and head material are the same for both sounds. If
either the head or rim settings are changed, the settings
for the other are changed automatically.