Roland V-Drums TD-8 Скачать руководство пользователя страница 117

Страница: 117 / 224

117

Chapter 5 Playing Along with Patterns

Chapter 5

MEASURE: ALL, First Measure-Last Measure

ALL:

This deletes all measures.

First Measure: 1–99

This specifies the measure at which deletion begins.

Last Measure: 1–99

This specifies the measure at which deletion is to end.

For example, to delete the measures from Measure 4 to
the end of Measure 6, specify as shown below.

fig.06-054

Erasing a pattern [ERASE]

This erases the pattern. Performance data is erased, while
beat, measure length, and other settings are left intact.

fig.06-062a.e

fig.06062b

Press [PATTERN], then [F3 (

MENU)].

[PATTERN] lights, and a pop-up menu appears.

Press [INC/+] or [DEC/-], rotate the VALUE dial, or
press CURSOR [

] or [

] to move the cursor to

“EDIT.”

Press [F3] to confirm your choice.

The “PATTERN EDIT” screen appears.

Press CURSOR [

] to move the cursor to “EDIT.”

Press [INC/+] or [DEC/-] or rotate the VALUE dial to
select “ERASE.”

The “ERASE” screen appears.

Press CURSOR [

] to move the cursor to “PATTERN.”

Press [INC/+] or [DEC/-] or rotate the VALUE dial to
select the pattern to be erased.

Press [F3 (EXEC)].

The confirmation screen appears.

fig.06-057

Again, press [F3 (EXEC)].

Press [F1 (CANCEL)] to cancel the operation.

PATTERN: 701–800

Select the pattern to be erased.
Indicated from left to right are the pattern number and
pattern name.

Erasing Unneeded Data to Make
a Measure Blank

This erases portions of the pattern, in measure units. The
erased portions become blank measures.

fig.06-062.e

Although the data is erased, the pattern length is
unchanged.

ffig.06-056

Follow the procedures in Steps

–

of “Erasing a

pattern [ERASE]” (p. 117) to specify the pattern.

Press [F2 (MEAS)].

The “ERASE MEASURE” screen appears.

Press CURSOR [

] to move the cursor to “PART.”

Press [INC/+] or [DEC/-] or rotate the VALUE dial to
specify the part to be erased.

Press CURSOR [

] to move the cursor to “MEASURE.”

Indicated from the left is the first measure, followed by
the last measure.
Press CURSOR [

] or [

] to move the cursor to the

item to be selected.

Содержание V-Drums TD-8

































































































































































































































Результаты поиска

Содержание V-Drums TD-8

Отзывы:

Похожие инструкции для V-Drums TD-8

Бренды по названию

Популярные бренды

Roland V-Drums TD-8, Руководство пользователя

Результаты поиска

Содержание V-Drums TD-8

Отзывы:

Похожие инструкции для V-Drums TD-8

Бренды по названию

Популярные бренды