Roland V-Drums TD-8, Руководство пользователя

Страница: 20 / 224

20
Button Operation and Displays
3.
Press [INC/+] or [DEC/-], rotate VALUE dial, or press CURSOR [ ]
or [ ] to select “FX SW”
fig.009
4.
Press [F3].
The “FX SW” screen appears.
fig.010
Using the [INC/+] and [DEC/-] Buttons and the
VALUE Dial
[INC/+] and [DEC/-] and the VALUE dial are both used to modify the
values of settings.
fig.011
The two methods have the following advantages.
[INC/+], [DEC/-]
• Each time [INC/+] is pressed, the value increases. Each time [DEC/-] is
pressed, the value decreases. This is convenient for fine adjustments.
• When making an on/off setting, [INC/+] will turn the setting on and
[DEC/-] will turn it off.
• If you hold down [INC/+] and press [DEC/-], the value will increase
rapidly. If you hold down [DEC/-] and press [INC/+] the value will
decrease rapidly.
• Holding down [SHIFT] while pressing [INC/+] or [DEC/-] magnifies all
the values being changed.
VALUE dial
• Since the dial allows you to make major changes to the value at once, it’s
a convenient way to make broad adjustments to a parameter quickly.
• Holding down [SHIFT] while rotating the VALUE dial magnifies all the
values being changed.