Roland V-Drums TD-8, Руководство пользователя

Страница: 114 / 224

114
Chapter 5 Playing Along with Patterns
Copying Part of a Pattern by
Measures
You can copy selected measures of a part or pattern.
fig.06-047.e
• Unlike copying an entire pattern, settings such as
instrument and part volume etc. will not be copied; only
the performance data will be copied.
• If the number of measures in the copy-source pattern
and the copy-destination pattern differ, the number of
measures in the copy-destination pattern may increase
or decrease according to this difference.
• Portions of one pattern cannot be copied to a part of another
pattern featuring a different beat.
• Pattern lengths that exceed 99 measures once changes are
made cannot be specified.
fig.06-048
1.
Follow Steps
1.
–
9.
in “Copying a Pattern [COPY]” (p.
113) to set each parameter.
2.
Press [F2 (MEAS)].
The “COPY MEASURE” screen appears.
Press [F1 (CANCEL)] to return to the “PATTERN EDIT”
screen.
3.
Press CURSOR [ ] to move the cursor to “SOURCE
PART.”
4.
Press [INC/+] or [DEC/-] or rotate the VALUE dial to
choose the copy-source part.
5.
Press the CURSOR [ ] to move the cursor to the first
measure of the “SOURCE MEAS.”
Indicated from the left is the first measure, followed by
the last measures.
Press CURSOR [
] or [ ] to move the cursor to the
item to be selected.
6.
Press [INC/+] or [DEC/-] or rotate the VALUE dial to
specify.
7.
Press CURSOR [ ] to move the cursor to “DEST
PART.”
8.
Press [INC/+] or [DEC/-] or rotate the VALUE dial to
choose the copy-destination part.
9.
Press CURSOR [ ] to move the cursor to “DEST
MEAS.”
10.
Press [INC/+] or [DEC/-] or rotate the VALUE dial to
specify the first measure within the copy destination.
11.
Press [F3 (EXEC)].
The confirmation screen appears.
fig.06-049
12.
Again, press [F3 (EXEC)].
Press [F1 (CANCEL)] to cancel the operation.
SOURCE PART: ALL, KIT, PERC, PART1, PART2,
PART3, PART4
This selects the copy-source part.
SOURCE MEAS: ALL, First Measure–Last Measure
ALL:
This copies all measures.
First Measure: 1–99
This specifies the measure at which copying is to begin.
Last Measure: 1–99
This specifies the measure at which copying is to end.
DEST PART: ALL, KIT, PERC, PART1, PART2,
PART3, PART4
This selects the copy-destination part.
DEST MEAS: 1–98, END
This specifies the measure in the copy destination at
which the copy is to begin. When “END” is selected, the
pattern is copied to the end.
• When “ALL” is specified in “SOURCE PART,” then only
“ALL” may be specified in “DEST PART.” Additionally,
if “KIT,” “PERC,” or one of the parts “PART1” to
“PART4” is specified in “SOURCE PART,” then “ALL”
cannot be specified in “DEST PART.”
• When copying between drum kit parts and percussion
parts or backing parts, copy takes place in accord with
the predetermined correspondence between note
numbers and pads. Only note numbers assigned to pads
will be copied.
SRC
1 2 6 4 3 7 8 5
DEST
1 2 6 4 3 7 8 5