Roland V-Drums TD-8, Руководство пользователя

Страница: 80 / 224

80
Chapter 1 Making the Settings for the Drum Kit
Playing With Brushes
For each kit you can specify whether sticks or brushes will be
used.
fig.02-003
1.
Press [KIT], then [F3 ( MENU)].
[KIT] lights, and a pop-up menu appears.
2.
Press [INC/+] or [DEC/-], rotate the VALUE dial, or
press CURSOR [
] or [ ] to move the cursor to
“FUNC.”
3.
Press [F3] to confirm your choice.
4.
Press [F1(BRUSH)].
The “BRUSH” screen appears.
5.
Press [INC/+] or [DEC/-] or rotate the VALUE dial to
select “ON.”
This changes the settings to those used for brush play.
6.
Press [KIT].
The “DRUM KIT” screen appears.
BRUSH SWITCH: OFF, ON
OFF :
Change to settings for stick play (brushes not used).
ON :
Change to settings for brush play.
The setting discussed here is necessary when you wish
to modify a kit that was created for stick performance in
order to play with brushes. If you wish to create a new
brush kit, it’s simpler to copy an existing one and then
edit it as you wish.
The setting you make here can also be viewed in the
drum kit name page (“DRUM KIT”).
fig.02-004
About Brush Trigger Settings
Turning the Brush switch on switches the TD-8 to Brush
trigger settings.
fig.02-004a.e
In the Brush settings, the sensitivity is set at a high level to
ensure reception of the brush performance.
Setting the Brush switch to “ON” allows you to use the
“brush swish/sweep” technique, in which the brushes
are swept lightly across the head. In addition to turning
on the Brush switch, the following requirements must
also be met.
• TRIGGER INPUT 3 must be used.
• You must use the PD-120, PD-100, PD-80R, or PD-80.
• Either 233 “BRUSH1 S,” 234 “BRUSH2 S,” 235
“BRUSH3 S,” 239 “BRSHTMBS” must be selected for
the instrument.
TRIG TYPE
SENSITIVITY
THRESHOLD
CURVE
BRUSH SWITCH: ON
Brush Trigger Settings
TRIG TYPE
SENSITIVITY
THRESHOLD
CURVE
BRUSH SWITCH: OFF
Stick Trigger Settings