Rohde & Schwarz 1424.7805.02, Руководство пользователя

Страница: 275 / 522

Remote Control Commands
R&S
®
NRX
275 User Manual 1178.5566.02 ─ 08
Usage: Query only
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:SIZE <count>
Effective for continuous average measurements.
Sets the size of the result buffer.
You can enable the buffer using
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:
STATe
.
Suffix:
<Sensor>
.
1 to 128
Configured sensor connected at: port A = 1, ... , port D = 4, R&S
NRX-B9 = 101, USB and LAN port = 5 to 100
Parameters:
<count> Range: 1 to 131072
*RST: 1
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:STATe <state>
Enables or disables the buffered continuous average measurement. If enabled, all
results generated by trigger events are collected until the buffer is filled. Thus, a higher
data rate is achieved.
You can set the size of the buffer with
[SENSe<Sensor>:][POWer:][AVG:
]BUFFer:SIZE
.
Suffix:
<Sensor>
.
1 to 128
Configured sensor connected at: port A = 1, ... , port D = 4, R&S
NRX-B9 = 101, USB and LAN port = 5 to 100
Parameters:
<state> ON | OFF
*RST:
OFF
14.6.7 Trace
Further information:
●
Chapter 7.3, "Trace" , on page 75
14.6.7.1 Trace Measurement Settings
In a trace measurement, you can use commands that combine several setting com-
mands. They are described in
Chapter 14.4.3, "Trace Measurements" , on page 201.
Measurement Settings and Results
www.allice.de Allice Messtechnik GmbH