Rohde & Schwarz 1424.7805.02, Руководство пользователя

Страница: 130 / 522

Sensor Configuration
R&S
®
NRX
130 User Manual 1178.5566.02 ─ 08
Offset Reference Plane ...............................................................................................130
Offset ...........................................................................................................................130
Modulation ...................................................................................................................130
WCDMA Chip Rate ..................................................................................................... 131
Offset Reference Plane
Selects the power sensor port to which the measurement results are referred to.
"Source" Source connector of the R&S NRT-Zxx power sensor
"Load" Load connector of the R&S NRT-Zxx power sensor
Remote command:
CALCulate<Measurement>[:CHANnel<Channel>]:CORRection:OFFSet:
RPLane
on page 366
INPut<Sensor>:PORT:POSition
on page 367
Offset
Considers the transmission loss in a cable that connects the desired measurement
point, set by
Offset Reference Plane , and the power sensor.
Remote command:
CALCulate<Measurement>[:CHANnel<Channel>]:CORRection:OFFSet:
STATe
on page 332
CALCulate<Measurement>[:CHANnel<Channel>]:CORRection:OFFSet[:
MAGNitude]
on page 334
INPut<Sensor>:PORT:OFFSet
on page 367
Modulation
Sets a communication standard for the modulation correction to reduce systematic
deviations occurring in power measurements.
"Off" Disabled.
NRT Measurement Type
www.allice.de Allice Messtechnik GmbH