Rohde & Schwarz 1424.7805.02, Руководство пользователя

Страница: 230 / 522

Remote Control Commands
R&S
®
NRX
230 User Manual 1178.5566.02 ─ 08
DISPlay:LAYout <layout>
Splits the measurement display into panes. A maximum number of 4 panes is possible,
one for each measurement. See also
Chapter 4.1.5, "Selecting the Display Layout" ,
on page 36.
Parameters:
<layout> L1 | L2 | L3 | L4
*RST:
L1
DISPlay:MESSage:TEXT:CLEar
Deletes the text for user-defined messages.
Define the message text using
DISPlay:MESSage:TEXT[:DATA]
.
Usage: Event
DISPlay:MESSage:TEXT[:DATA] <string>
Defines the text for user-defined messages.
Parameters:
<string> ASCII characters
String "\n" causes a line break. The max. number of lines
depends on the message type: 9
lines for messages and 7 lines
for queries.
The length of a line depends on the characters used. Too long
lines are cut off.
DISPlay:MESSage:TYPE <type>
Sets the message type for the user-defined messages.
Parameters:
<type> QUERy | MESSage
QUERy
The execution of remote control commands is blocked, until the
dialog containing the query is closed.
MESSage
Remote control command processing is immediately continued.
Close the dialog containing the message by pressing [Esc] or
using
DISPlay:MESSage[:STATe] OFF
.
*RST: MESSage
DISPlay:MESSage[:STATe] <state>
If enabled, displays a dialog containing a user-defined message.
Define the message text using
DISPlay:MESSage:TEXT[:DATA]
.
Measurement Settings and Results
www.allice.de Allice Messtechnik GmbH