Rohde & Schwarz 1424.7805.02, Руководство пользователя

Страница: 201 / 522

Remote Control Commands
R&S
®
NRX
201 User Manual 1178.5566.02 ─ 08
<source_list> <expr>
For the parameter descriptions, see
"Parameter list"
on page 194.
Usage: Query only
14.4.3 Trace Measurements
Further commands to configure this measurement are describes in Chapter 14.6.7,
"Trace" , on page 275.
Further information about the measurement:
●
Chapter 7.3, "Trace" , on page 75
Parameter list
The following parameters are used.
●
<scope_size>
Mandatory. Number of test points on the time axis.
Corresponds to
[SENSe<Sensor>:]TRACe:POINts
on page 456.
●
<capture_time>
Mandatory. Period within which measured data are captured in the trace measure-
ments.
Corresponds to
[SENSe<Sensor>:]TRACe:TIME
on page 245.
●
<source_list>
Mandatory. Primary and secondary sensor. The number for each sensor is prece-
ded by the character
@
. The entire expression is enclosed in parentheses.
Example: (
@
3),(
@
2)
Sensor C is the primary sensor, and sensor B is the secondary sensor.
CONFigure<Measurement>:XTIMe[:POWer]? <scope_size>, <capture_time>,
<source_list>
FETCh<Measurement>:XTIMe[:POWer]? <scope_size>, <capture_time>,
<source_list>
READ<Measurement>:XTIMe[:POWer]? <scope_size>, <capture_time>,
<source_list>
MEASure<Measurement>:XTIMe[:POWer]? <scope_size>, <capture_time>,
<source_list>
Used to measure power over time.
Suffix:
<Measurement>
.
1 to 8
Measurement
Query parameters:
<scope_size> <expr>
<capture_time> Default unit: s
Making Measurements
www.allice.de Allice Messtechnik GmbH